ALTERA USB BLASTER LINUX INSTALL
ALTERA USB BLASTER LINUX DRIVERS
ALTERA USB BLASTER LINUX 32 BIT

See the rw rights for вЂњothersвЂќ for the device 003 which is the usb blaster. Then you should be able to see the device in the usb device list with lsusbД«us 001 Device 002: ID 80ee:0021 VirtualBox USB TabletД«us 001 Device 003: ID 09fb:6001 Altera BlasterД«us 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root can see the permissions for the devices with ls. Notice that you have to attach the usb device to the virtual machine (Virtual Box) with Devicesв†’USB Devicesв†’Altera USB-Blaster. By default, root is the only user allowed to use these devices.You must change the permissions on the device files before you can use the USB-Blaster or USB-Blaster.

ALTERA USB BLASTER LINUX DRIVERS

QuartusВ® II software does not need any specific usb drivers on Linux to access the USB-BlasterTM and USB-Blaster II download cable. The file should contain the following rules for the Altera DE1 board.ДҐles # Altera USB-Blaster for Quartus FPGA Software SUBSYSTEMS= 'usb', ATTR = '6810', MODE= '0666'ДЇor the following test you need to attach the Altera Board to your computer. Using USB Blaster / USB Blaster II under Linux. The Lark Board, which sells for 940, is one of the more powerful ARM development boards youвЂ™re likely to find, at least if FPGAs are what youвЂ™re looking for. For that you have to create and add the file вЂњlesвЂќ to the directory вЂњ/etc/udev/rules.dвЂќ and reboot. Newark Element14вЂ™s Lark Board SBC runs Linux on AlteraвЂ™s ARM/FPGA Cyclone V SX SoC, and offers USB Blaster II, camera, and expansion interfaces. Now you have to change modelsim /opt/altera/13.0sp1/modelsim_ase/vco file and find the location:Д®xport LD_LIBRARY_PATH=/opt/altera/13.0sp1/modelsim_ase/lib32 USB SettingsДЇor the USB programming via the USB Blasterв„ў, the port permissions have to be set correctly. Mkdir /opt/altera/13.0sp1/modelsim_ase/lib32Д¬p objs/.libs/libfreetype.so* /opt/altera/13.0sp1/modelsim_ase/lib32/ Copy the libfreetype library files to the modelsim directory. It is important to configure the freetype library with вЂњвЂ“without-pngвЂќ.

ALTERA USB BLASTER LINUX INSTALL

Now install the build dependencies and compile and install the old libfreetype version. # Major bug fix updates produced after the final release of the #deb cdrom:/ bionic main multiverse restricted universe Enable the deb-src packages in the /etc/apt/sources.list file to make the build dependencies work. ** Fatal: Read failure in vlm process you have to install an old version or differently configured version of libfreetype. Sudo make install Download and install Quartus 13.0sp1 (incl. configure -libdir=/usr/lib/x86_64-linux-gnu configure -libdir=/usr/lib/i386-linux-gnu Sudo apt install build-essential gcc-multilib zlib1g-dev:i386Д¬FLAGS='-m32'. You have to install both, the 32bit and the 64bit versions. Ii libpng16-16:amd64 1.6.34-1ubuntu0.18.04.1 amd64 PNG library - runtime (version download, compile and copy the libpng12 library to the quartus install directory. Quartus: error while loading shared libraries: libpng12.so.0: cannot open shared object file: No such file or following check shows that libpng16 is installed but quartus needs dpkg -l | grep png If you do not install libpng12, then the following error will quartus That is why edited permission for the usb_device is necessary.Д¬reate a file /etc/udev/rules.d/51-usbblaster.The quartus software requires the libpng12 library but Lubuntu 18.04 comes with libpng16. YouвЂ™ll usually run these as a user, which means jtagd will also run as a user. If not already running, jtagd will be startetd automatically when the Quartus software or jtagconfig is run. Jtagd, part of the Quartus tools, is a deamon that provides the interface between the Altera tool accessing the JTAG chain and the USB driver.

By default, only root has access to these so we must make sure the user is allowed to access them as well.

The Quartus software will use the Linux built-in usb_device drivers. Take note of the Product ID listed - 6010 in the above example.

usb 2-2: New USB device strings: Mfr =1, Product =2, SerialNumber =3 usb 2-2: New USB device found, idVendor =09fb, idProduct =6010 It may also require starting it through the terminal with: The eclipse-nios2 tool requires installing libgtk2.0-0:i386 Look up on what package you may find this library and install it. If it doesnвЂ™t work, run it from the terminal and there should be some complaint about a missing packge or library. Try opening and using any tool directly fom the Quartus GUI.

ALTERA USB BLASTER LINUX 32 BIT

Export QUARTUS_64BIT =1 # Remove this if running on 32 bit export ALTERA_ROOT = ' $HOME /Applications/altera' # Change this to the path you've installed Altera Quartus at export QUARTUS_ROOTDIR_OVERRIDE = ' $ALTERA_ROOT /quartus' export QSYS_ROOTDIR = ' $QUARTUS_ROOTDIR_OVERRIDE /sopc_builder/bin' export QUARTUS_LIBRARY_PATHS = ' $QUARTUS_ROOTDIR_OVERRIDE /linux/:/lib/x86_64-linux-gnu/' export SOPC_KIT_NIOS2 = ' $ALTERA_ROOT /nios2eds' export LD_LIBRARY_PATH = ' $LD_LIBRARY_PATH : $QUARTUS_LIBRARY_PATHS ' export PATH = ' $PATH : $ALTERA_ROOT /quartus/bin' 3) Install 32-bit packagesДЄ few 32-bit compatibility packages will probably need to be installed on 64-bit systems in order for some tools to work.

Altera usb blaster linux